H N J E R S E Y

Loading

Define the Jacket Type Before You Send an RFQ

The most expensive mistake in a wet-season order is discovering after bulk production that the garment cannot handle the rain it was bought for. A shower-resistant training top and a fully waterproof shell are different products with different fabrics, seams and prices. If your RFQ just says “soccer jacket,” every supplier will quote something different, and you will not be comparing like with like.

Start by deciding which job the garment does. The table below separates the common types so your request is specific.

Jacket type Best for Limit What to specify in the RFQ
Lightweight wind/shower jacket Warm-up, light drizzle, sideline wear Not for sustained heavy rain Fabric type, weight, lining, hood yes/no
Waterproof shell Coaches and substitutes standing in prolonged rain Heavier, less breathable, higher unit cost Waterproof rating, seam treatment, zip type
Training or track jacket Dry-to-damp training, travel kits Wicks sweat but is not a rain barrier Fit, stretch, print areas
Insulated jacket or vest Cold, wet climates Bulk affects packing and shipping cost Fill, shell fabric, size run

For club buyers, the usual split is a full-protection shell for staff and a lighter training piece for players. Splitting the order this way often keeps the budget under control, though it means managing two specifications and two sample approvals.

A Sourcing Checklist for Matching Waterproof Ratings, Seam Construction, Size Runs and Logo Decoration to Wet-Season Team Orders

Use this list when you shortlist suppliers. Each line is a question to get answered in writing, with the reason it matters and where it stops applying.

Item What to ask for Why it matters Limit / when it does not apply
Waterproof rating A stated rating (for example, a hydrostatic head figure) with the test method and who ran the test “Water-resistant” has no fixed meaning; a number lets you compare quotes Not needed for a jacket meant only for warm-up in light drizzle
Seam construction Whether seams are taped or sealed, and which seams (shoulders, hood, zip line) Rain enters at stitch holes first, even on good fabric Taping adds cost and lead time; skip it for a training piece that only needs wind protection
Zips and closures Zip type, storm flap, cuff and hem finish Water travels through unprotected zip lines Less relevant for pullover styles
Fabric and breathability Fabric composition, weight in gsm, and a swatch Players overheat in non-breathable shells during warm-ups Coaches standing still can accept lower breathability
Size run A verified size chart in cm, with fit notes over a base layer Rain jackets are worn over kit, so sizing differs from jerseys Not needed if you reorder an already approved style
Logo decoration Method (sublimation, heat transfer, embroidery), placement, and whether it affects waterproofing Embroidery needles make holes in a waterproof layer; some transfers peel when wet Logo choice matters less on a plain-colour training piece
Wash and wet durability Colorfastness terms and what counts as a defect Wet-season kit is washed often and dries slowly Applies only to decorated areas, not to fabric performance

One caution: the checklist is a buyer’s tool, not a claim about any supplier. Ask each shortlisted factory to fill in the same rows, and treat a blank or vague answer as an open risk.

What Hening Can Document Today

Hening Clothing Co., Ltd. is a custom sportswear manufacturer in Guangzhou, China, working from a 1000 sqm factory with 100+ workers. Our core fabric is 100% polyester, moisture-wicking, with 4-way stretch at 140-160 gsm, which suits jerseys and training wear. We also list a Custom Sport Jacket category.

Here is how the confirmed facts map to buyer concerns.

Buyer concern Supplied fact What remains for you to confirm
Prints fading after repeated washing Locked-color dye-sublimation inks; 1-year colorfastness guarantee Whether the guarantee wording covers your jacket fabric
Wrong sizes on arrival Verified size chart; free reprint for wrong size Size chart for the specific jacket pattern
Delivery before the rains start Standard production of 7-10 days, rush orders available Timeline for your jacket construction; the standard figure is stated for custom jerseys
Small or split orders No MOQ, with pricing based on quantity Price breaks at your planned volume
Production capacity 5 automatic dye-sublimation printing lines; 1000+ custom jerseys daily output Capacity allocated to your order window
Quality systems ISO 9001 and ISO 14001 certification Scope of the certificates; request copies

What the supplied facts do not establish is a waterproof rating or taped-seam process for rain shells. That is exactly what you should request in a sample specification before treating us as a fit for a fully waterproof order. For lightweight, printed team pieces, the fabric and print capability above is more directly relevant.

Evidence: What Our Past Orders Do and Do Not Prove

Real references help, but they need to be read for their scope. Here are the orders we can cite:

  • 500+ sublimated jerseys for a US high school basketball league.
  • Full custom uniforms for an Australian soccer club’s three teams.
  • 1000 event jerseys for a European marathon.
  • Training sportswear for sports retailers in New Zealand.
  • Running singlets for road-race events across Zimbabwe.

These show we handle multi-team, multi-size and event-scale sublimated orders for overseas buyers. They do not show waterproof-jacket supply, and we would not present them that way. If your priority is a rain shell, ask for jacket-specific samples and specifications, not just references. If your priority is consistent team kit across several squads, the Australian club order is the closest match. See our Soccer Jerseys range for the matching base kit.

Players in matching printed soccer jacket warming up on a wet pitch

Cooperation Terms and What to Agree Before You Sample

The confirmed terms are short. There is no MOQ, but unit price depends on quantity, so a 30-piece order and a 300-piece order will not carry the same price. Printing defects and wrong sizes are reprinted free, and colorfastness is guaranteed for one year.

No fixed sample-to-bulk sequence is supplied here, so treat the following as points to settle in writing rather than assumed practice:

  1. Specification sign-off. Fabric, weight, seam treatment, zip, hood and decoration method listed in one document.
  2. Sample scope. Whether a sample is a plain pattern check, a printed sample, or both, and who pays for it.
  3. Acceptance criteria. What counts as a defect, how it is photographed, and the time window to report it.
  4. Warranty coverage. Written confirmation that the reprint and colorfastness terms apply to jackets.
  5. Delivery date. A date tied to artwork approval, with a rush option priced if needed.
  6. Size data. Size run per squad, with spare sizes for late roster changes.

Common Mistakes in Rainy-Season Bulk Orders

  • Ordering on photos alone. A rain jacket looks the same dry whether or not it leaks. Test a sample under a shower or hose before approving.
  • Choosing the print before the fabric. Dye-sublimation works on polyester, and the shade you see on screen will not carry across every fabric. Fix the fabric first.
  • Using jersey sizing for jackets. The jacket goes over a kit and sometimes a base layer. Add ease and check the chart.
  • Leaving it late. Quoting in the same month the rains begin leaves no room for a sample revision.
  • Treating “no MOQ” as “no price break.” Small runs are possible, but unit cost falls with quantity.

A Worked Example: A 40-Player Club Splitting Its Order

Consider an illustrative club with two squads and six coaching staff. The club wants players in a lightweight printed top-layer and staff in a heavier shell.

  • Players (about 34 pieces): a lightweight polyester piece with sublimated crest and sponsor logo. This is where sublimation, 4-way stretch and verified sizing matter most. Pair it with Custom Team Jerseys so colors match.
  • Staff (about 6 pieces): a waterproof shell with taped seams. Ask for a written rating and seam spec, and accept it only after a wet test.

Requesting two quotes at different quantities shows you where the price breaks fall. It also shows whether a supplier can really support both pieces or only one.

What to Send Us to Qualify Your Order

To tell you honestly whether we fit, we need the jacket type (shower-resistant, waterproof or insulated), target quantity per squad, size split, decoration artwork, required delivery date and any waterproof rating you must meet. With that, we can state what we can confirm from our current fabric and printing capability and what needs a sample specification first.

Send your requirements and target dates to Hening Clothing Co., Ltd. through our website and ask for a quote or sample advice for your rainy-season squads.

Looking for
Custom Jersey
Service?

Send Email

sales@hnjersey.com
Contact Us

Custom Uniform for
Your Team and Events.

img
High
Quality
img
Good
Service
img
Fully
Customize
img
Fast
Working
img
Accurate
Color
img
Rapid
Manufacturing

Need team uniform for your team or project?

GET A QUOTE
WhatsApp Email +8618978569271