Loading
Most buyers regret the same thing: they signed off on the lowest unit price for a jacket with hood and found out in month eight that the zipper pullers were failing, the prints had faded, and a second freight shipment was needed to replace 30% of the stock. The quote looked cheap. The program was not.
I’m Linjing He, and I’ve spent ten years on sportswear production floors. The pattern is consistent. A unit price tells you what one garment costs on the day it leaves the factory. It says nothing about what you pay to keep a team, staff group or promotional program dressed for five years.
This article gives you a formula you can paste into a spreadsheet, a table of the specifications that actually move price, and a short list of what to ask any supplier before you compare quotes. That includes us.

Split every quote into six inputs. If a supplier will not separate them, you cannot tell where the money goes or where a cheaper competitor cut corners.
Landed unit cost (LUC) = Shell (S) + Lining (L) + Hood trims (H) + Decoration (D) + Freight and duty per unit (F)
Five-year cost per wearer = LUC × (1 + r)
Here, r is the number of replacement garments you expect per wearer over five years. An r of 0.4 means four replacements for every ten wearers. Reorder freight is already inside LUC, so each replacement carries it.
| Input | What it covers | What to ask the supplier | Why it moves the five-year number |
|---|---|---|---|
| Shell (S) | Outer fabric, weight in gsm, fiber content, stretch | Fiber content, gsm, whether stretch is built into the fabric | Thin or low-stretch shells wear out at seams and elbows first |
| Lining (L) | Mesh, tricot, fleece or none; any insulation layer | Lining material, and whether it is a separate cost line | Lining is the easiest place to cut cost silently |
| Hood trims (H) | Drawcord, eyelets, zipper, cord stops, hood stitching and panel count | Zipper brand or grade, eyelet type, stitch spec at the hood seam | Hoods and zippers are the most common failure points, so they drive r |
| Decoration (D) | Dye-sublimation, embroidery, heat transfer, labels | Method, placement, color-fastness terms | Faded or cracked branding triggers early replacement even when the garment is sound |
| Freight and duty (F) | Carton volume, weight, mode, destination duty | Packed carton dimensions and pieces per carton | Bulky lined hoods cost more per piece to ship than jerseys or singlets |
| Replacement rate (r) | Failures, sizing errors, fading, staff turnover | Reprint and remake terms in writing | Multiplies every other input |
These figures are illustrative buyer-model inputs, not our price list. Replace them with your own quotes.
| Item | Quote A (higher price) | Quote B (lower price) |
|---|---|---|
| Shell | 9.00 | 7.00 |
| Lining | 3.00 | 2.00 |
| Hood trims | 1.50 | 0.80 |
| Decoration | 2.50 | 2.20 |
| Freight and duty | 2.30 | 2.50 |
| LUC | 18.30 | 14.50 |
| Assumed r over five years | 0.4 | 1.0 |
| Five-year cost per wearer | 25.62 | 29.00 |
Quote B is 21% cheaper on day one and about 13% more expensive over five years. The result depends entirely on r, and you have to estimate r honestly. Limit: this model suits recurring programs with stable headcount. For a one-off event giveaway worn twice, r is near zero and the cheapest acceptable quote can win.
Consumer product pages list insulated, water-resistant, windproof and casual variants as if they were style choices. For a buyer they are cost decisions, each landing in a different column of the formula.
| Specification | Mainly affects | Fits when | Does not fit when |
|---|---|---|---|
| Insulated fill or heavy lining | L, F | Cold-climate staff or sideline wear | Warm-season programs, or markets where you only need a layering piece |
| Water-resistant or windproof finish | S, r | Outdoor staff and coaching use | Indoor promotional wear, where it adds cost with no benefit |
| Full-zip vs. pullover hood | H, F | Full-zip for easy on and off; pullover for simpler construction | Full-zip where zipper failure would be costly to replace |
| Lightweight stretch polyester shell | S, D | Training, warm-up and sublimated team designs | Heavy-duty work wear that needs abrasion resistance |
| All-over sublimation vs. small embroidered logo | D, r | Sublimation for full-color team identity; embroidery for a single small crest | Sublimation on dark or non-polyester trims, which will not take the print |
Ask for each of these as a line item. Waterproofing and insulation claims also need written specifications from your supplier. Do not treat a product-page adjective as a performance guarantee.
Hening Clothing Co., Ltd. makes custom sportswear in a 1,000 sqm factory in Guangzhou, China, with 100+ workers and five automatic dye-sublimation printing lines. Our core range is team and sport apparel, including our Custom Sport Jacket and Custom Casual Wear lines. Here is how that maps to the formula.
The honest boundary: our daily output figure of 1,000+ custom jerseys describes jersey production. It is not a promise for lined jackets, whose daily volume depends on the construction.
We have supplied 500+ sublimated jerseys to a US high school basketball league, full custom uniforms for the three teams of an Australian soccer club, and 1,000 event jerseys for a European marathon. We have also supplied training sportswear to sports retailers in New Zealand and running singlets for road-race events across Zimbabwe. These are sportswear cases. None of them is a hooded-jacket order, so treat them as evidence of print durability, sizing control and delivery on team programs, not of lined outerwear results. If you need hooded-jacket references, ask for them directly. Do not infer them from the list.
If your program also includes matching kit, our Custom Team Jerseys category shows how we handle sublimated designs across a full squad.
We have no MOQ, so a small club can order a single batch of jackets. Pricing is still based on quantity, so a 30-piece quote will carry a higher unit price than a 300-piece one. For budget planning, request price tiers at two or three quantities rather than one figure.
Our free reprint covers printing defects and wrong sizes. Before you order, agree these points in writing, because they set your real r:
To price a hooded program accurately, we need the following. Missing items are the usual reason quotes shift later.
Send these details to our team and ask for a line-item quote split into shell, lining, hood trims, decoration and freight. We will also confirm which construction and guarantee terms apply to your style before you commit.