H N J E R S E Y

Loading

The Sourcing Risk Behind a Cheap-Looking Quote

Two suppliers quote the same roster of basketball uniforms. One price is 30% lower. Three weeks later you find out the cheaper quote was for single-sided jerseys with no shorts, and the other one was for a reversible Elite Custom Basketball Set with matching shorts. Nobody lied. The quotes just described different products.

That is the regret we see buyers run into most. Retail listings advertise a “starting from” figure and a production window, but they rarely show which specification the figure covers. For procurement teams and private-label buyers, the useful question is not “what does a set cost?” It is “which line items move the price, and by how much, when I change one spec at a time?”

This guide gives you a quote-comparison method for exactly that. I’m Linjing He, and I’ve spent 10 years in custom sportswear manufacturing. The method below is the one I’d use to put two or three supplier quotes side by side before negotiating.

A Quote-Comparison Model That Isolates Four Cost Drivers

Ask every supplier to price the same base set first, then add one variable at a time. That way each change shows up as its own line instead of being buried in a bundled figure. The four drivers that matter for reversible basketball sets are below.

Cost driver What changes in production Direction of price effect Fits when Does not apply when
Reversible construction Two usable faces instead of one. More fabric per garment, extra sewing steps, and both sides must be finished cleanly. Raises unit price versus a single-sided jersey. Ask whether the quote is for two layers or one double-faced fabric. The team wants a home/away kit from one garment, or needs fewer SKUs for a league or school program. You only need one colorway. You would pay for a second face you never wear.
Sublimation coverage Full-body, panel-only, or logo-only print. Both faces of a reversible jersey need print in any case. Larger coverage and more colors raise print and fit-check effort. Placement-only designs sit at the low end. Full coverage suits club kits with a strong brand pattern. Minimal coverage suits budget-led school orders. Solid-color garments with a single chest mark. Coverage is not the main driver there.
Roster quantity Pricing is quantity-based. Setup effort is spread over more pieces as volume rises. Unit price generally falls as quantity rises, though the exact breaks are the supplier’s to state. You are comparing 12-piece club orders against 100+ piece league orders. You assume a break that was never written into the quote. Ask for tiers in writing.
Matching shorts Same fabric family and print file, plus a second garment to cut, sew and size. Adds a separate line. Reversible shorts add the same construction cost as reversible jerseys. Teams that need a coordinated game kit with matching shorts. Buyers who already hold shorts stock, or who only need jersey tops for fan or retail sale.

Our own fabric spec gives you the baseline: 100% polyester, moisture-wicking, 4-way stretch, 140-160 gsm. For a reversible build, ask each supplier to state the finished gsm of the construction rather than assuming it matches the single-layer range. Weight affects both breathability on court and the cost of material.

How to Request the Quote

  1. Send one spec sheet to every supplier: fabric, gsm, collar style, sizes and roster count.
  2. Request Line A: single-sided jersey, panel print, no shorts.
  3. Request Line B: same jersey made reversible, nothing else changed.
  4. Request Line C: Line B with full sublimation coverage on both faces.
  5. Request Line D: matching shorts added, in single-sided and reversible versions.
  6. Ask for quantity tiers at three points, such as your minimum, expected and stretch roster.

The gap between A and B is your reversible premium. The gap between B and C is your print coverage cost. Do the arithmetic yourself, because suppliers who quote only a bundle make it hard to see which spec you are paying for.

Worked Example: A 40-Piece Club Order Under Three Specs

This is a hypothetical scenario to show how the model works. No prices are implied. The point is which questions to put to the supplier.

A club buyer needs 40 jersey-and-short sets across two age groups. They compare three configurations:

  • Spec 1: single-sided jersey, panel sublimation, shorts with logo only.
  • Spec 2: reversible jersey, panel sublimation on both faces, single-sided shorts.
  • Spec 3: reversible jersey and reversible shorts, full sublimation on both faces.

Spec 1 to Spec 2 isolates the jersey reversible premium. Spec 2 to Spec 3 shows the combined effect of shorts construction and full coverage, so ask the supplier to split those two lines. If a supplier will not itemize them, you cannot tell whether the extra cost is material, print or labor.

Then check the limits. If the club will wear only the home color for the first season, Spec 1 plus a later reorder of away jerseys may cost less over time than paying the reversible premium on all 40 sets now. If the club rotates colors at every match, Spec 2 usually wins on storage and kit-bag simplicity. The right answer depends on how many games the second face will actually play.

Why Hening’s Capabilities Fit This Kind of Quote

Our role is that of a manufacturer. We run a 1000 sqm factory in Guangzhou, China, with 100+ workers and 5 automatic dye-sublimation printing lines. Daily output is 1000+ custom jerseys. For a buyer comparing quotes, each of those facts addresses a specific concern.

Buyer concern Relevant fact Scope to confirm
Prints fading after washing Locked-color inks, with a 1-year colorfastness guarantee Care instructions you will give players; the guarantee terms in writing
Wrong or inconsistent sizing Verified size chart, plus free reprint for wrong size Send your size chart or request ours before roster submission
Slow delivery Standard production of 7-10 days; rush orders available Confirm the window for your exact reversible spec and quantity
Process control ISO 9001 quality management and ISO 14001 environmental management certification These are management-system certifications, not product test reports

The 7-10 day figure is our standard production time. It is not a promise for every configuration, so confirm it against your spec before you plan a season opener around it.

Evidence From Past Orders

We supplied 500+ sublimated jerseys for a US high school basketball league. That is the closest case to an elite team program: roster-based, size-dependent and print-heavy. We also produced full custom uniforms for an Australian soccer club’s three teams, which shows how a multi-team kit order is handled. And we delivered 1000 event jerseys for a European marathon, a larger run that tested volume rather than customization.

None of these cases tells you what a reversible set costs. They show the type of orders our lines handle. If you want to see how our single-sided products look before adding reversible construction, browse our Basketball Jerseys range or the wider Custom Team Jerseys category.

Reversible sublimated basketball jersey and shorts shown on both faces for an Elite Custom Basketball Set quote

Cooperation Terms and What Still Needs Agreement

We have no MOQ, so a small club can order. Pricing is based on quantity, so a 12-piece order will not carry the same unit price as a 200-piece order. If a supplier says “no MOQ” without explaining how price changes with volume, ask for the tier table.

Our printing defects and wrong-size errors are covered by a free reprint. That covers production errors. It does not cover a roster you submitted with the wrong sizes, so agree in writing who signs off the size list before production starts.

Matters to settle before you place an order:

  • Whether the quote is for reversible construction as two layers or as one double-faced fabric.
  • Which face is the “primary” face for numbers and sponsor placement.
  • How name and number changes after approval are treated.
  • How defects are reported and how long you have to report them.
  • What counts as acceptable color variation on approval of the digital proof.

These are points to agree, not established practice we assume on your behalf. We would rather settle them before production than after.

Common Quote-Comparison Mistakes

  • Comparing a bundle to a line item. A supplier’s set price may include shorts. Another’s may not.
  • Ignoring the second face. Reversible jerseys need artwork, numbers and checks on both sides. Quotes that only mention one side are incomplete.
  • Taking gsm at face value. A “140-160 gsm” figure for a single layer is not automatically the weight of a reversible garment.
  • Assuming a quantity break. Get the tiers written down.
  • Treating a lead time as universal. A rush window quoted for simple tops may not hold for full-coverage reversible sets with shorts.

RFQ Checklist Before You Contact a Supplier

  • Roster count by size, plus a spare allowance if you want one.
  • Reversible or single-sided, per garment.
  • Sublimation coverage: full, panel or logo-only, on each face.
  • Shorts: included or excluded, single-sided or reversible.
  • Required delivery date and destination country.
  • Whether you need a reorder match for later seasons.

If volleyball or other team sports are also on your sourcing list, the same itemized approach works for a Volleyball Uniform order. The cost drivers repeat, even when the cut changes.

Spec sheet comparing quote lines for reversible basketball uniforms, sublimation coverage and matching shorts

Send us your roster size, reversible requirement, coverage level and whether shorts are included, and we will return a quote that itemizes each of those lines so you can compare it against other suppliers.

Looking for
Custom Jersey
Service?

Send Email

sales@hnjersey.com
Contact Us

Custom Uniform for
Your Team and Events.

img
High
Quality
img
Good
Service
img
Fully
Customize
img
Fast
Working
img
Accurate
Color
img
Rapid
Manufacturing

Need team uniform for your team or project?

GET A QUOTE
WhatsApp Email +8618978569271