Loading
Two quotes for the same-looking soccer jacket can describe two different products. One lists a plain shell and no lining. The other includes a mesh lining and a water-repellent finish. Buyers who compare the totals without comparing the specs usually discover the gap after the deposit, when the sample arrives thinner than expected or the shipping invoice adds lines nobody priced.
I have spent ten years in custom sportswear production, and the pattern repeats. The cheapest line on the spreadsheet is rarely the cheapest jacket once fabric, finish, print method and freight are put on equal terms. This article gives procurement teams a way to make quotes comparable before negotiating quantity.
Hening Clothing Co., Ltd. is a custom sportswear manufacturer. Our 1000 sqm factory in Guangzhou has 100+ workers and five automatic dye-sublimation printing lines. Daily output is 1000+ custom jerseys. Standard production takes 7-10 days, and rush orders are available.
Our core fabric spec is 100% polyester, moisture-wicking, with 4-way stretch at 140-160 gsm. That is a jersey spec. For jackets, shell weight, lining construction and any waterproof finish must be confirmed per project, so we do not quote a fixed jacket construction in advance. Our Custom Sport Jacket range is the starting point for outerwear briefs.
There is no MOQ, which suits small clubs and academies testing a first order. Pricing still depends on quantity, so a 30-piece run and a 300-piece run will not carry the same unit price.

We do not publish fixed jacket prices here, because they depend on the exact spec and quantity. What we can show is the direction and relative weight of each driver, so you can see why quotes differ and where to push.
| Cost driver | Lower-cost choice | Higher-cost choice | Effect on unit quote | Limit / when it does not apply |
|---|---|---|---|---|
| Shell fabric | Lightweight polyester woven or knit | Heavier or specialty-finished shell | Usually the largest single material cost | A cheaper shell can cost more if pilling or poor stretch causes rejects |
| Lining type | Unlined, or single-layer mesh | Full lining or insulated lining | Adds fabric plus extra sewing time | Cold-climate teams may need the lining, and removing it saves little if the jacket is then unwearable |
| Waterproof treatment | None, or a water-repellent finish | Coated or seam-sealed construction | Adds material and process cost | Coatings can change how a print behaves, so ask for a printed sample first |
| Printing | Simple logo placement | Full-body dye-sublimation graphics | Cost rises with print area and colour complexity | Sublimation needs a polyester surface. Other fibres may need a different decoration method |
| Order volume | Larger runs | Very small runs | Unit price falls as quantity rises | No MOQ means you can order small, but set-up effort is spread over fewer pieces |
Say a club wants a team jacket for 60 players and staff, in club colours with a crest and sponsor logo. Ask for three quote lines on the same quantity:
Three lines, one quantity. Now the budget decision is visible: if Line C is too expensive, you can see exactly which feature to drop, instead of guessing which part of a single bundled price moved.
Ask every supplier to state the trade term used in the quote. A price that excludes freight cannot be compared with one that includes it.
These limits apply to budget-led purchases. If a league or sponsor mandates a particular fabric or finish, the spec is fixed and your lever is quantity and timing.
Our facility holds ISO 9001 quality management and ISO 14001 environmental management system certifications. These cover management systems and do not certify any individual jacket for weather performance. Judge waterproof claims by sample testing.
Our printing record is built on sublimated team apparel:
These were jerseys, uniforms and singlets, not jackets. They show volume handling, multi-team coordination and sublimation work for overseas buyers. They do not prove performance of a specific jacket construction. If jacket references matter to your approval process, ask us what is available for your exact spec.
The print risk teams worry about most is fading after washing. We use locked-color inks and back them with a 1-year colorfastness guarantee. Colour matching to your brand shades should still be checked on a sample before bulk.

These terms are fixed in our standard offer:
The following depend on your project and should be agreed before you pay a deposit:
The reprint policy covers printing defects and wrong sizes. It does not cover a spec you later decide was wrong, such as a shell that turns out too light for your climate. That is why the spec sheet comes first.
If you are also outfitting players in match kits, check our Soccer Jerseys and Custom Team Jerseys pages. A matching jersey-and-jacket set can be quoted in one request, which often makes planning easier.
Gather these before contacting any supplier, including us:
Send this spec, plus your target budget range, to Hening Clothing Co., Ltd. and ask for itemized quote lines at each spec level, as in the three-line example above. We will confirm which shell, lining and finish options we can quote for your brief, so you can compare real numbers instead of assumptions.